SAX-100.4D - Sundown Audio 100W 4-Channel Amplifier

The SAX-100.4 is built to the same exacting standards as the SAX-125.2 but adds another set of channels and more advanced crossovers. It's flexible crossovers allow the user to run a 2-way active speaker setup with no external processing. It packs enough punch that one could also run a set of front speakers with one pair of channels and a subwoofer, bridged, on the other pair of channels for use as a total system amplifier where high power is not required. The latest "D" revision features industry leading crossover flexibility even more advanced than prior versions and also features and upgraded power supply section for more power and enhanced longevity.

* Independent 1/2 and 3/4 Channel High Pass Filter Variable * with x 10 Range Selectable Switch * Independent 1/2 and 3/4 Channel Low Pass Filter Variable * with x 10 Range Selectable Switch * HPF/FULL/LPF Selectable Switch * Independent 1/2 and 3/4 Channel Electronic Crossover Slope Selectable * Switch with 12dB and 24dB Octave * Variable Input Level Control * Input Sensitivity : 200mV ~ 6V * Subsonic Filter : 10Hz ~ 500Hz * Signal Input and Line Out RCA Connectors * Tested Voltage & THD: 14.4V & Less than 0.05% THD * Operating Voltage : DC10V~16V Power Input * Wired Remote Controller

RMS power, 4 ohm stereo 100W x 4CH RMS power, 2 ohm stereo 160W x 4CH RMS power, 4 ohm bridged 320W x 2CH Signal to Noise Ratio >90dB Low pass frequency crossover 50Hz~5kHz (CH1&2) 50Hz~5KHz (CH3&4) (50-500 with x10 switch) Selectable 12 or 24 dB slope High Pass Crossover 50Hz~5kHz (CH1&2) 50Hz~5kHz (CH3&4) (50-500 with x10 switch) Selectable 12 or 24 dB slope Variable Subsonic Filter 10Hz to 500Hz Frequency Response 10Hz ~ 40KHz (+/-1dB) Bass Boost 0~18dB Variable Bass-Boost Frequency Control 35Hz to 120Hz THD@RMS Watts <0.1% Channel Separation 75dB Fuse Rating 30A x 3 Input Sensitivity Variable 200mV~6V (+/- 5%) Dimensions 252(W) x 58(H) x 480(L)mm